Using hot water or steam to clean and then chemically prep parts is quite common. A wash station is where you spray your parts with a detergent and/or chemical pretreatment agent, such as iron phosphate.
If oils, solvents or chemical residue covers any part of your products’ surface, you’ll want to consider a Wash Station. (For more information on getting the right blast room, go here.) Blast rooms are especially useful for job shops that work with raw materials that aren’t pristine, such as plate steel or tube stock that has areas of oxidation or welding residue. Depending on the situation, you would typically use either an appropriate blast media (grit) or steel shot to blast all the unwanted debris off your part until it has a clean metal surface that’s ready for powder coating.
A blast room is an enclosure where you use compressed air to propel abrasive material against the surface of your parts. If the product you want to powder coat has a lot of debris (rust, laser scale, preexisting paint), then you will likely need a Blast Room. (For more information on pretreatment, start with our Pretreatment Primer.) Pretreatment equipment is used before your product is ever powder coated and is designed to make sure that your product is as clean as possible before powder is applied. Anything left on your product prior to coating will affect the powder’s adhesion and durability. To achieve the best results with your powder coating process, your product needs to be clean-free of dust, debris, oil, rust, old paint or finish material. Pretreatment ( Where Your Product Is Cleaned Prior To Powder Coating)Īpplication ( Where The Powder Is Sprayed Onto The Product)Ĭuring ( Where The Powder Is Cured Into A Durable Finish) Pretreatment For Powder Coating
#Quick quotes powder coating professional
There are three different types of powder coating equipment you must have to perform professional quality powder coating: What Sort of Equipment Do I Need For Powder Coating Systems? This creates a very durable and attractive coating around the product once the melted powder cools and hardens. The product is then heated in the oven, allowing the powder to melt and flow into a uniform coating that adheres to the part. In the final step, the part is moved into a curing oven. In the first step, a product (usually a metal part) is cleaned and prepared for coating. Powder coating is a multi-step finishing process.
#Quick quotes powder coating install
Whether you’re just curious about professional powder coating or ready to install your first coating line, this brief overview will give you the basic information you need to get started. If you want to powder coat but aren’t sure where to start, our Beginner’s Guide to Powder Coating Equipment is intended to help anyone learn about the business of powder coating.
0 kommentar(er)
